Product Search
Search results for 'D-2172'
Showing 521 - 540 of 1122 Total Results
CA-0358
Location: Self-Consolidating Concrete
The V-Funnel is used to measure flowability of fresh self-consolidating concrete. The funnel is filled and the time taken for it to flow through the apparatus is measured. A valve on the outflow port can be closed to allow SCC to settle, which indicates the tendency for segregation.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
SA-0360
Location: Soils
Glass plate with ground finish on one side and seamed edges. Dimensions: 12" x 12" x 3/8" thick.
CA-2980-01
Location: Aggregate
8 oz. test bottles are graduated in oz. and ml and have watertight screw-on caps.
Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)
SC-0122-A
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
(4) options
Location: Tamping Rods
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
(3) options
Location: Cube Retainers and Pads
Cube retainers and pads are used with retainer caps in the cube molding system; pads are molded for consistent shape and thickness - from Test Mark.
CA-0217
Location: Cylinder Transport
The steel concrete cylinder carrier from Test Mark is used for carrying 6-inch dia. cylinders in the field or lab.
CA-1450
Location: Gloves
Test Mark's heat resistant gloves are used for handling heated items when conducting laboratory work with ovens or hot plates.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
4" Test Cylinder Carrying Case
CA-0214
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 4x8 test cyliners for easier field to lab transfer with less specimen damage.
SA-1000
Location: Preparation Knife
The preparation knife from Test Mark Industries is used for sample preparation and general lab work.
Copper Condenser w/inlet, outlet tubes
AA-1004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-1004; Test Mark Industries.
Copper Condenser w/inlet, outlet tubes
AA-2004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-2004; Test Mark Industries.
Sieve, 12" dia., #8 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1750-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
Sieve, 12" dia., #8 Mesh, Half Height, Brass Frame, Brass Mesh
CA-1750-12HB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
